# What does this PR do?
Our starter distro required Ollama to be running (and a large list of
models available in that Ollama) to successfully start. This adjusts
things so that Ollama does not have to be running to use the starter
template / distro.
To accomplish this, a few changes were needed:
* The Ollama provider is now configurable whether it raises an Exception
or just logs a warning when it cannot reach the Ollama server on
startup. The default is to raise an exception (same as previous
behavior), but in the starter template we adjust this to just log a
warning so that we can bring the stack up without needing a running
Ollama server.
* The starter template no longer specifies a default list of models for
Ollama, as any models specified there need to actually be pulled and
available in Ollama. Instead, it adds a new
`OLLAMA_INFERENCE_MODEL` environment variable where users can provide an
optional model to register with the Ollama provider on startup.
Additional models can also be registered via the typical
`models.register(...)` at runtime.
* The vLLM template was adjusted to also allow an optional
`VLLM_INFERENCE_MODEL` specified on startup, so that the behavior
between vLLM and Ollama was consistent here to make it easy to get up
and running quickly.
* The default vector store was changed from sqlite-vec to faiss.
sqlite-vec can enabled via setting the `ENABLE_SQLITE_VEC` environment
variable, like we do for chromadb and pgvector. This is due to
sqlite-vec not shipping proper arm64 binaries, like we previously fixed
in #1530 for the ollama distribution.
## Test Plan
With this change, the following scenarios now work with the starter
template that did not before:
* no Ollama running
* Ollama running but not all of the Llama models pulled locally
* Ollama running with a custom model registered on startup
* vLLM running with a custom model registered on startup
* running the starter template on linux/arm64, like when running
containers on Mac without rosetta emulation
---------
Signed-off-by: Ben Browning <bbrownin@redhat.com>
This allows a set of rules to be defined for determining access to
resources. The rules are (loosely) based on the cedar policy format.
A rule defines a list of action either to permit or to forbid. It may
specify a principal or a resource that must match for the rule to take
effect. It may also specify a condition, either a 'when' or an 'unless',
with additional constraints as to where the rule applies.
A list of rules is held for each type to be protected and tried in order
to find a match. If a match is found, the request is permitted or
forbidden depening on the type of rule. If no match is found, the
request is denied. If no rules are specified for a given type, a rule
that allows any action as long as the resource attributes match the user
attributes is added (i.e. the previous behaviour is the default.
Some examples in yaml:
```
model:
- permit:
principal: user-1
actions: [create, read, delete]
comment: user-1 has full access to all models
- permit:
principal: user-2
actions: [read]
resource: model-1
comment: user-2 has read access to model-1 only
- permit:
actions: [read]
when:
user_in: resource.namespaces
comment: any user has read access to models with matching attributes
vector_db:
- forbid:
actions: [create, read, delete]
unless:
user_in: role::admin
comment: only user with admin role can use vector_db resources
```
---------
Signed-off-by: Gordon Sim <gsim@redhat.com>
# What does this PR do?
The goal of this PR is code base modernization.
Schema reflection code needed a minor adjustment to handle UnionTypes
and collections.abc.AsyncIterator. (Both are preferred for latest Python
releases.)
Note to reviewers: almost all changes here are automatically generated
by pyupgrade. Some additional unused imports were cleaned up. The only
change worth of note can be found under `docs/openapi_generator` and
`llama_stack/strong_typing/schema.py` where reflection code was updated
to deal with "newer" types.
Signed-off-by: Ihar Hrachyshka <ihar.hrachyshka@gmail.com>
# What does this PR do?
closes https://github.com/meta-llama/llama-stack/issues/1586
this issue arises when loading an mcp_endpoint from run.yaml. the issue
does not manifest for mcp servers added via a running distro server. the
existing tests only cover the case of adding to a running server.
the code for loading run.yaml strips type information from mcp_endpoint,
passing `{"uri": ...}` instead of `URL(uri=...)` along to the resource
provider registration.
## Test Plan
1. run an mcp server
2. add an mcp tool config to the dev.py, e.g.
```
diff --git a/llama_stack/templates/dev/dev.py b/llama_stack/templates/dev/dev.py
index 69924acb..e0dc7189 100644
--- a/llama_stack/templates/dev/dev.py
+++ b/llama_stack/templates/dev/dev.py
@@ -6,6 +6,8 @@
from typing import List, Tuple
+from llama_stack.apis.common.content_types import URL
+
from llama_stack.apis.models.models import ModelType
from llama_stack.distribution.datatypes import (
ModelInput,
@@ -154,6 +156,11 @@ def get_distribution_template() -> DistributionTemplate:
toolgroup_id="builtin::code_interpreter",
provider_id="code-interpreter",
),
+ ToolGroupInput(
+ toolgroup_id="mcp::filesystem",
+ provider_id="model-context-protocol",
+ mcp_endpoint=URL(uri="http://localhost:8002/sse"),
+ ),
]
embedding_model = ModelInput(
model_id="all-MiniLM-L6-v2",
```
3. run distro_codegen.py
4. llama stack build --template dev --run
before this pr, the `llama stack run` would fail w/ `AttributeError:
'dict' object has no attribute 'uri'`, after it will succeed.
# What does this PR do?
Providers that live outside of the llama-stack codebase are now
supported.
A new property `external_providers_dir` has been added to the main
config and can be configured as follow:
```
external_providers_dir: /etc/llama-stack/providers.d/
```
Where the expected structure is:
```
providers.d/
inference/
custom_ollama.yaml
vllm.yaml
vector_io/
qdrant.yaml
```
Where `custom_ollama.yaml` is:
```
adapter:
adapter_type: custom_ollama
pip_packages: ["ollama", "aiohttp"]
config_class: llama_stack_ollama_provider.config.OllamaImplConfig
module: llama_stack_ollama_provider
api_dependencies: []
optional_api_dependencies: []
```
Obviously the package must be installed on the system, here is the
`llama_stack_ollama_provider` example:
```
$ uv pip show llama-stack-ollama-provider
Using Python 3.10.16 environment at: /Users/leseb/Documents/AI/llama-stack/.venv
Name: llama-stack-ollama-provider
Version: 0.1.0
Location: /Users/leseb/Documents/AI/llama-stack/.venv/lib/python3.10/site-packages
Editable project location: /private/var/folders/mq/rnm5w_7s2d3fxmtkx02knvhm0000gn/T/tmp.ZBHU5Ezxg4/ollama/llama-stack-ollama-provider
Requires:
Required-by:
```
Closes: https://github.com/meta-llama/llama-stack/issues/658
Signed-off-by: Sébastien Han <seb@redhat.com>
# What does this PR do?
currently the `inspect` API for providers is really a `list` API. Create
a new `providers` API which has a GET `providers/{provider_id}` inspect
API
which returns "user friendly" configuration to the end user. Also add a
GET `/providers` endpoint which returns the list of providers as
`inspect/providers` does today.
This API follows CRUD and is more intuitive/RESTful.
This work is part of the RFC at
https://github.com/meta-llama/llama-stack/pull/1359
sensitive fields are redacted using `redact_sensetive_fields` on the
server side before returning a response:
<img width="456" alt="Screenshot 2025-03-13 at 4 40 21 PM"
src="https://github.com/user-attachments/assets/9465c221-2a26-42f8-a08a-6ac4a9fecce8"
/>
## Test Plan
using https://github.com/meta-llama/llama-stack-client-python/pull/181 a
user is able to to run the following:
`llama stack build --template ollama --image-type venv`
`llama stack run --image-type venv
~/.llama/distributions/ollama/ollama-run.yaml`
`llama-stack-client providers inspect ollama`
<img width="378" alt="Screenshot 2025-03-13 at 4 39 35 PM"
src="https://github.com/user-attachments/assets/8273d05d-8bc3-44c6-9e4b-ef95e48d5466"
/>
also, was able to run the new test_list integration test locally with
ollama:
<img width="1509" alt="Screenshot 2025-03-13 at 11 03 40 AM"
src="https://github.com/user-attachments/assets/9b9db166-f02f-45b0-86a4-306d85149bc8"
/>
Signed-off-by: Charlie Doern <cdoern@redhat.com>
# What does this PR do?
This commit introduces a new logging system that allows loggers to be
assigned
a category while retaining the logger name based on the file name. The
log
format includes both the logger name and the category, producing output
like:
```
INFO 2025-03-03 21:44:11,323 llama_stack.distribution.stack:103 [core]: Tool_groups: builtin::websearch served by
tavily-search
```
Key features include:
- Category-based logging: Loggers can be assigned a category (e.g.,
"core", "server") when programming. The logger can be loaded like
this: `logger = get_logger(name=__name__, category="server")`
- Environment variable control: Log levels can be configured
per-category using the
`LLAMA_STACK_LOGGING` environment variable. For example:
`LLAMA_STACK_LOGGING="server=DEBUG;core=debug"` enables DEBUG level for
the "server"
and "core" categories.
- `LLAMA_STACK_LOGGING="all=debug"` sets DEBUG level globally for all
categories and
third-party libraries.
This provides fine-grained control over logging levels while maintaining
a clean and
informative log format.
The formatter uses the rich library which provides nice colors better
stack traces like so:
```
ERROR 2025-03-03 21:49:37,124 asyncio:1758 [uncategorized]: unhandled exception during asyncio.run() shutdown
task: <Task finished name='Task-16' coro=<handle_signal.<locals>.shutdown() done, defined at
/Users/leseb/Documents/AI/llama-stack/llama_stack/distribution/server/server.py:146>
exception=UnboundLocalError("local variable 'loop' referenced before assignment")>
╭────────────────────────────────────── Traceback (most recent call last) ───────────────────────────────────────╮
│ /Users/leseb/Documents/AI/llama-stack/llama_stack/distribution/server/server.py:178 in shutdown │
│ │
│ 175 │ │ except asyncio.CancelledError: │
│ 176 │ │ │ pass │
│ 177 │ │ finally: │
│ ❱ 178 │ │ │ loop.stop() │
│ 179 │ │
│ 180 │ loop = asyncio.get_running_loop() │
│ 181 │ loop.create_task(shutdown()) │
╰────────────────────────────────────────────────────────────────────────────────────────────────────────────────╯
UnboundLocalError: local variable 'loop' referenced before assignment
```
Co-authored-by: Ashwin Bharambe <@ashwinb>
Signed-off-by: Sébastien Han <seb@redhat.com>
[//]: # (If resolving an issue, uncomment and update the line below)
[//]: # (Closes #[issue-number])
## Test Plan
```
python -m llama_stack.distribution.server.server --yaml-config ./llama_stack/templates/ollama/run.yaml
INFO 2025-03-03 21:55:35,918 __main__:365 [server]: Using config file: llama_stack/templates/ollama/run.yaml
INFO 2025-03-03 21:55:35,925 __main__:378 [server]: Run configuration:
INFO 2025-03-03 21:55:35,928 __main__:380 [server]: apis:
- agents
```
[//]: # (## Documentation)
---------
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-authored-by: Ashwin Bharambe <ashwin.bharambe@gmail.com>
You now run the integration tests with these options:
```bash
Custom options:
--stack-config=STACK_CONFIG
a 'pointer' to the stack. this can be either be:
(a) a template name like `fireworks`, or
(b) a path to a run.yaml file, or
(c) an adhoc config spec, e.g.
`inference=fireworks,safety=llama-guard,agents=meta-
reference`
--env=ENV Set environment variables, e.g. --env KEY=value
--text-model=TEXT_MODEL
comma-separated list of text models. Fixture name:
text_model_id
--vision-model=VISION_MODEL
comma-separated list of vision models. Fixture name:
vision_model_id
--embedding-model=EMBEDDING_MODEL
comma-separated list of embedding models. Fixture name:
embedding_model_id
--safety-shield=SAFETY_SHIELD
comma-separated list of safety shields. Fixture name:
shield_id
--judge-model=JUDGE_MODEL
comma-separated list of judge models. Fixture name:
judge_model_id
--embedding-dimension=EMBEDDING_DIMENSION
Output dimensionality of the embedding model to use for
testing. Default: 384
--record-responses Record new API responses instead of using cached ones.
--report=REPORT Path where the test report should be written, e.g.
--report=/path/to/report.md
```
Importantly, if you don't specify any of the models (text-model,
vision-model, etc.) the relevant tests will get **skipped!**
This will make running tests somewhat more annoying since all options
will need to be specified. We will make this easier by adding some easy
wrapper yaml configs.
## Test Plan
Example:
```bash
ashwin@ashwin-mbp ~/local/llama-stack/tests/integration (unify_tests) $
LLAMA_STACK_CONFIG=fireworks pytest -s -v inference/test_text_inference.py \
--text-model meta-llama/Llama-3.2-3B-Instruct
```
A self-respecting server needs good observability which starts with
configurable logging. Llama Stack had little until now. This PR adds a
`logcat` facility towards that. Callsites look like:
```python
logcat.debug("inference", f"params to ollama: {params}")
```
- the first parameter is a category. there is a static list of
categories in `llama_stack/logcat.py`
- each category can be associated with a log-level which can be
configured via the `LLAMA_STACK_LOGGING` env var.
- a value `LLAMA_STACK_LOGGING=inference=debug;server=info"` does the
obvious thing. there is a special key called `all` which is an alias for
all categories
## Test Plan
Ran with `LLAMA_STACK_LOGGING="all=debug" llama stack run fireworks` and
saw the following:
Hit it with a client-sdk test case and saw this:
# What does this PR do?
We want to bundle a bunch of (typically remote) providers in a distro
template and be able to configure them "on the fly" via environment
variables. So far, we have been able to do this with simple env var
replacements. However, sometimes you want to only conditionally enable
providers (because the relevant remote services may not be alive, or
relevant.) This was not possible until now.
To aid this, we add a simple (bash-like) env var replacement
enhancement: `${env.FOO+bar}` evaluates to `bar` if the variable is SET
and evaluates to empty string if it is not. On top of that, we update
our main resolver to ignore any provider whose ID is null.
This allows using the distro like this:
```bash
llama stack run dev --env CHROMADB_URL=http://localhost:6001 --env ENABLE_CHROMADB=1
```
when only Chroma is UP. This disables the other `pgvector` provider in
the run configuration.
## Test Plan
Hard code `chromadb` as the vector io provider inside
`test_vector_io.py` and run:
```bash
LLAMA_STACK_BASE_URL=http://localhost:8321 pytest -s -v tests/client-sdk/vector_io/ --embedding-model all-MiniLM-L6-v2
```
# What does this PR do?
- Update `/eval-tasks` to `/benchmarks`
- ⚠️ Remove differentiation between `app` v.s. `benchmark` eval task
config. Now we only have `BenchmarkConfig`. The overloaded `benchmark`
is confusing and do not add any value. Backward compatibility is being
kept as the "type" is not being used anywhere.
[//]: # (If resolving an issue, uncomment and update the line below)
[//]: # (Closes #[issue-number])
## Test Plan
- This change is backward compatible
- Run notebook test with
```
pytest -v -s --nbval-lax ./docs/getting_started.ipynb
pytest -v -s --nbval-lax ./docs/notebooks/Llama_Stack_Benchmark_Evals.ipynb
```
<img width="846" alt="image"
src="https://github.com/user-attachments/assets/d2fc06a7-593a-444f-bc1f-10ab9b0c843d"
/>
[//]: # (## Documentation)
[//]: # (- [ ] Added a Changelog entry if the change is significant)
---------
Signed-off-by: Ihar Hrachyshka <ihar.hrachyshka@gmail.com>
Signed-off-by: Ben Browning <bbrownin@redhat.com>
Signed-off-by: Sébastien Han <seb@redhat.com>
Signed-off-by: reidliu <reid201711@gmail.com>
Co-authored-by: Ihar Hrachyshka <ihar.hrachyshka@gmail.com>
Co-authored-by: Ben Browning <ben324@gmail.com>
Co-authored-by: Sébastien Han <seb@redhat.com>
Co-authored-by: Reid <61492567+reidliu41@users.noreply.github.com>
Co-authored-by: reidliu <reid201711@gmail.com>
Co-authored-by: Yuan Tang <terrytangyuan@gmail.com>
Lint check in main branch is failing. This fixes the lint check after we
moved to ruff in https://github.com/meta-llama/llama-stack/pull/921. We
need to move to a `ruff.toml` file as well as fixing and ignoring some
additional checks.
Signed-off-by: Yuan Tang <terrytangyuan@gmail.com>
See https://github.com/meta-llama/llama-stack/issues/827 for the broader
design.
Third part:
- we need to make `tool_runtime.rag_tool.query_context()` and
`tool_runtime.rag_tool.insert_documents()` methods work smoothly with
complete type safety. To that end, we introduce a sub-resource path
`tool-runtime/rag-tool/` and make changes to the resolver to make things
work.
- the PR updates the agents implementation to directly call these typed
APIs for memory accesses rather than going through the complex, untyped
"invoke_tool" API. the code looks much nicer and simpler (expectedly.)
- there are a number of hacks in the server resolver implementation
still, we will live with some and fix some
Note that we must make sure the client SDKs are able to handle this
subresource complexity also. Stainless has support for subresources, so
this should be possible but beware.
## Test Plan
Our RAG test is sad (doesn't actually test for actual RAG output) but I
verified that the implementation works. I will work on fixing the RAG
test afterwards.
```bash
pytest -s -v tests/agents/test_agents.py -k "rag and together" --safety-shield=meta-llama/Llama-Guard-3-8B
```
See https://github.com/meta-llama/llama-stack/issues/827 for the broader
design.
This is the first part:
- delete other kinds of memory banks (keyvalue, keyword, graph) for now;
we will introduce a keyvalue store API as part of this design but not
use it in the RAG tool yet.
- renaming of the APIs
# What does this PR do?
This PR changes our API to follow more idiomatic REST API approaches of
having paths being resources and methods indicating the action being
performed.
Changes made to generator:
1) removed the prefix check of "get" as its not required and is actually
needed for other method types too
2) removed _ check on path since variables can have "_"
## Test Plan
LLAMA_STACK_BASE_URL=http://localhost:5000 pytest -v
tests/client-sdk/agents/test_agents.py
# What does this PR do?
PR #639 introduced the notion of Tools API and ability to invoke tools
through API just as any resource. This PR changes the Agents to start
using the Tools API to invoke tools. Major changes include:
1) Ability to specify tool groups with AgentConfig
2) Agent gets the corresponding tool definitions for the specified tools
and pass along to the model
3) Attachements are now named as Documents and their behavior is mostly
unchanged from user perspective
4) You can specify args that can be injected to a tool call through
Agent config. This is especially useful in case of memory tool, where
you want the tool to operate on a specific memory bank.
5) You can also register tool groups with args, which lets the agent
inject these as well into the tool call.
6) All tests have been migrated to use new tools API and fixtures
including client SDK tests
7) Telemetry just works with tools API because of our trace protocol
decorator
## Test Plan
```
pytest -s -v -k fireworks llama_stack/providers/tests/agents/test_agents.py \
--safety-shield=meta-llama/Llama-Guard-3-8B \
--inference-model=meta-llama/Llama-3.1-8B-Instruct
pytest -s -v -k together llama_stack/providers/tests/tools/test_tools.py \
--safety-shield=meta-llama/Llama-Guard-3-8B \
--inference-model=meta-llama/Llama-3.1-8B-Instruct
LLAMA_STACK_CONFIG="/Users/dineshyv/.llama/distributions/llamastack-together/together-run.yaml" pytest -v tests/client-sdk/agents/test_agents.py
```
run.yaml:
https://gist.github.com/dineshyv/0365845ad325e1c2cab755788ccc5994
Notebook:
https://colab.research.google.com/drive/1ck7hXQxRl6UvT-ijNRZ-gMZxH1G3cN2d?usp=sharing
## What does this PR do?
This is a long-pending change and particularly important to get done
now.
Specifically:
- we cannot "localize" (aka download) any URLs from media attachments
anywhere near our modeling code. it must be done within llama-stack.
- `PIL.Image` is infesting all our APIs via `ImageMedia ->
InterleavedTextMedia` and that cannot be right at all. Anything in the
API surface must be "naturally serializable". We need a standard `{
type: "image", image_url: "<...>" }` which is more extensible
- `UserMessage`, `SystemMessage`, etc. are moved completely to
llama-stack from the llama-models repository.
See https://github.com/meta-llama/llama-models/pull/244 for the
corresponding PR in llama-models.
## Test Plan
```bash
cd llama_stack/providers/tests
pytest -s -v -k "fireworks or ollama or together" inference/test_vision_inference.py
pytest -s -v -k "(fireworks or ollama or together) and llama_3b" inference/test_text_inference.py
pytest -s -v -k chroma memory/test_memory.py \
--env EMBEDDING_DIMENSION=384 --env CHROMA_DB_PATH=/tmp/foobar
pytest -s -v -k fireworks agents/test_agents.py \
--safety-shield=meta-llama/Llama-Guard-3-8B \
--inference-model=meta-llama/Llama-3.1-8B-Instruct
```
Updated the client sdk (see PR ...), installed the SDK in the same
environment and then ran the SDK tests:
```bash
cd tests/client-sdk
LLAMA_STACK_CONFIG=together pytest -s -v agents/test_agents.py
LLAMA_STACK_CONFIG=ollama pytest -s -v memory/test_memory.py
# this one needed a bit of hacking in the run.yaml to ensure I could register the vision model correctly
INFERENCE_MODEL=llama3.2-vision:latest LLAMA_STACK_CONFIG=ollama pytest -s -v inference/test_inference.py
```
# What does this PR do?
This PR moves all print statements to use logging. Things changed:
- Had to add `await start_trace("sse_generator")` to server.py to
actually get tracing working. else was not seeing any logs
- If no telemetry provider is provided in the run.yaml, we will write to
stdout
- by default, the logs are going to be in JSON, but we expose an option
to configure to output in a human readable way.
# What does this PR do?
Adds a `/alpha/` prefix to all the REST API urls.
Also makes them all use hyphens instead of underscores as is more
standard practice.
(This is based on feedback from our partners.)
## Test Plan
The Stack itself does not need updating. However, client SDKs and
documentation will need to be updated.
This PR adds a method in stack to return the stackrunconfig object based
on the template name. This will be used to instantiate a direct client
without the need for an explicit run.yaml
---------
Co-authored-by: Dinesh Yeduguru <dineshyv@fb.com>
# What does this PR do?
This PR kills the notion of "pure passthrough" remote providers. You
cannot specify a single provider you must specify a whole distribution
(stack) as remote.
This PR also significantly fixes / upgrades testing infrastructure so
you can now test against a remotely hosted stack server by just doing
```bash
pytest -s -v -m remote test_agents.py \
--inference-model=Llama3.1-8B-Instruct --safety-shield=Llama-Guard-3-1B \
--env REMOTE_STACK_URL=http://localhost:5001
```
Also fixed `test_agents_persistence.py` (which was broken) and killed
some deprecated testing functions.
## Test Plan
All the tests.
# What does this PR do?
This PR kills the notion of "ShieldType". The impetus for this is the
realization:
> Why is keyword llama-guard appearing so many times everywhere,
sometimes with hyphens, sometimes with underscores?
Now that we have a notion of "provider specific resource identifiers"
and "user specific aliases" for those and the fact that this works with
models ("Llama3.1-8B-Instruct" <> "fireworks/llama-3pv1-..."), we can
follow the same rules for Shields.
So each Safety provider can make up a notion of identifiers it has
registered. This already happens with Bedrock correctly. We just
generalize it for Llama Guard, Prompt Guard, etc.
For Llama Guard, we further simplify by just adopting the underlying
model name itself as the identifier! No confusion necessary.
While doing this, I noticed a bug in our DistributionRegistry where we
weren't scoping identifiers by type. Fixed.
## Feature/Issue validation/testing/test plan
Ran (inference, safety, memory, agents) tests with ollama and fireworks
providers.
# What does this PR do?
This is a follow-up to #425. That PR allows for specifying models in the
registry, but each entry needs to look like:
```yaml
- identifier: ...
provider_id: ...
provider_resource_identifier: ...
```
This is headache-inducing.
The current PR makes this situation better by adopting the shape of our
APIs. Namely, we need the user to only specify `model-id`. The rest
should be optional and figured out by the Stack. You can always override
it.
Here's what example `ollama` "full stack" registry looks like (we still
need to kill or simplify shield_type crap):
```yaml
models:
- model_id: Llama3.2-3B-Instruct
- model_id: Llama-Guard-3-1B
shields:
- shield_id: llama_guard
shield_type: llama_guard
```
## Test Plan
See test plan for #425. Re-ran it.
# What does this PR do?
This PR brings back the facility to not force registration of resources
onto the user. This is not just annoying but actually not feasible
sometimes. For example, you may have a Stack which boots up with private
providers for inference for models A and B. There is no way for the user
to actually know which model is being served by these providers now (to
be able to register it.)
How will this avoid the users needing to do registration? In a follow-up
diff, I will make sure I update the sample run.yaml files so they list
the models served by the distributions explicitly. So when users do
`llama stack build --template <...>` and run it, their distributions
come up with the right set of models they expect.
For self-hosted distributions, it also allows us to have a place to
explicit list the models that need to be served to make the "complete"
stack (including safety, e.g.)
## Test Plan
Started ollama locally with two lightweight models: Llama3.2-3B-Instruct
and Llama-Guard-3-1B.
Updated all the tests including agents. Here's the tests I ran so far:
```bash
pytest -s -v -m "fireworks and llama_3b" test_text_inference.py::TestInference \
--env FIREWORKS_API_KEY=...
pytest -s -v -m "ollama and llama_3b" test_text_inference.py::TestInference
pytest -s -v -m ollama test_safety.py
pytest -s -v -m faiss test_memory.py
pytest -s -v -m ollama test_agents.py \
--inference-model=Llama3.2-3B-Instruct --safety-model=Llama-Guard-3-1B
```
Found a few bugs here and there pre-existing that these test runs fixed.
